Payless Fence Company
Call (720) 697-2456

Pool fence installation Denver CO with gates that close themselves

Pool fencing checked against the rules, with self-closing, self-latching gates


Pool fence installation Denver CO is a safety fence first and a fence second. The gate has to close itself, the latch has to hold, and the fence has to resist climbing — because the fence is there for the moment nobody is watching. One thing we will not do is state a barrier height as fact: Denver's residential pool-barrier height is not settled in the code text we reviewed, and the published figures conflict. We check the current rule for your address and permit before building.

Black aluminum pool fence with self-closing gate, Denver backyard pool and deck
Denver Fence Contractor 17 Denver neighborhoods served
Open Daily Mon–Sun 7:00 AM–8:00 PM
Call to Book Call (720) 697-2456
Permit Guidance Zoning rules checked per job

What our pool fence installation includes

Every pool fence we build comes with the same core scope: layout, post setting, the fence itself, self-closing gates, and cleanup. Here is what is covered, and what we will flag before we start if your pool or your lot needs something different.

Layout and utility locate

We mark the fence line with stakes and a string line, confirm property boundaries, and contact Colorado 811 for utility locates before any digging starts. A pool fence is measured to the pool, not the catalog.

Posts set in concrete

Pool-fence posts go deep in concrete — frost depth in the Denver metro is commonly cited at about 36 inches — because a pool fence has to stay plumb and its gates have to keep closing.

Aluminum or iron panels

Aluminum and iron are the usual pool-fence materials: they will not rot, they keep the pool visible, and their pickets can be spaced to resist climbing. We talk through which suits the pool and the house.

Self-closing, self-latching gates

Every pool gate gets self-closing hinges and a self-latching latch, tested until the gate closes and latches itself every time. A pool gate that does not close itself is not a pool fence.

Permit and code check

We check the current Denver pool-barrier rule for your address and permit before building, because the published height figures conflict between 48 and 60 inches. We do not state a height as fact, and we do not build to an assumed one.

Demo, haul-away, and cleanup

Old pool fence, concrete footings, and scrap all go in the trailer. We rake the work area, sweep the driveway, and walk the line with you before we leave.

Pool fence installation Denver CO: what the job actually involves


Pool fence installation Denver CO is the process of building a fence around a pool that keeps unsupervised access out: posts in concrete, panels with climb-resistant picket spacing, and gates that close and latch themselves. The work is in the gates — a pool fence is only as good as its gate, and a gate that does not close itself is a gap in the fence. The fence is checked against the current rule for the address before the build, because the published height figures conflict.

Most Denver homeowners want a pool fence for one reason: a child or a dog getting to the water unsupervised. The material is usually aluminum or iron, because both keep the pool visible from the house — and visibility matters, because the fence is not a substitute for watching the water. The honest limit is the code picture: Denver's residential pool-barrier height is not settled in the code text we reviewed, so we check the rule rather than assume it.

How our pool fence installation process works

Every job follows the same four steps, whether it is a backyard pool in Washington Park or a multifamily pool in Central Park. You will know what happens each day.

01

Call

Call (720) 697-2456, Monday through Sunday, 7:00 AM to 8:00 PM. We talk through the pool fence, the yard, and the lot, and set a time to measure.

02

Measure & check

We measure the pool surround, talk through the material and the gates, and check the current Denver pool-barrier rule for your address and permit before ordering anything.

03

Build

Posts go in concrete and cure, panels go up plumb with climb-resistant spacing, and the gates are fitted with self-closing hinges and self-latching latches, then tested. We keep the site tidy as we go.

04

Walk-through

We walk the finished pool fence with you, check every gate and latch, and clear the site before we leave.

Tools and methods we use on every pool fence

Tools & Equipment

Post hole digger and auger

Used to bore clean holes deep enough to clear the frost line. A pool fence has to stay plumb, because a leaning post is a gate that will not close.

String line and level

The string line keeps the fence straight around the pool, and the level keeps every post plumb. A pool fence is a closed loop — a crooked post shows at the gate.

Circular saw and fine-tooth blade

Aluminum and iron cut cleanly only with the right blade. A rough cut leaves a burr that shows through the finish.

Tamper and wheelbarrow

The tamper packs soil around each footing so the pool fence post does not shift, and the wheelbarrow moves concrete mix to the hole.

Level and square for gates

Pool gates are built square and hung on reinforced posts. We check the diagonal before the gate goes on the hinges, not after.

Self-closing hinges and latches

Used on every pool gate. A gate that closes and latches itself is the whole point of a pool fence, and we test it until it does so every time.

Methods & Standards

Posts set below Denver frost depth

Frost depth in the Denver metro is commonly cited at about 36 inches, and the exact code figure for fence posts is not settled in the sources we reviewed — so we treat 36 inches as the floor, never the target, and set pool fence posts in concrete.

Climb-resistant picket spacing

Pickets are spaced to resist climbing, and horizontal rails are kept off the pool side where a child could use them as a step. A pool fence that can be climbed is not a pool fence.

Gates tested until they close themselves

Every pool gate is tested until it closes and latches itself every time, from every open position. A gate that closes from fully open but not from half open is a gate that will be left open.

Code checked, not assumed

Denver's residential pool-barrier height is not settled in the code text we reviewed — secondary sources conflict between 48 and 60 inches — so we check the current rule for your address and permit before building, and we do not state a height as fact.

When Denver homeowners call us for a pool fence

01

A new pool needs a fence before it can be used

What we do:We measure the pool surround, talk through aluminum or iron with self-closing, self-latching gates, and check the current Denver pool-barrier rule for the address before ordering. The fence goes up before the pool opens.

→ A pool that can be used, with a fence that keeps unsupervised access out.

02

An old pool fence has a gate that will not close itself

What we do:We check the gate first — hinges, post, and latch — and fix the actual problem. A pool gate that does not close itself is not a pool fence, and it is the first thing we fix.

→ A pool gate that closes and latches itself every time, from every open position.

03

A multifamily property needs a pool surround for its residents

What we do:We measure the pool, talk through the material and the gates with the manager or the board, and build the surround. The pool-barrier rule is checked for the address, and the gates are tested monthly by the property, not just at install.

→ Amenities the residents can use, with gates that close themselves.

04

A backyard pool needs a fence that keeps the water visible

What we do:We measure the surround, talk through aluminum with open pickets, and build it. The fence keeps the pool visible from the house, because the fence is not a substitute for watching the water.

→ A pool fence that protects the water without hiding it.

How pool fence installation runs in Denver

Denver's pool-fence picture has one honest gap: the residential barrier height is not settled in the code text we reviewed. Secondary sources conflict between 48 and 60 inches, and the public-pool rule — 60 inches, self-closing and self-latching gates, latch at 54 inches or higher — is written for public and semi-public pools, not for a backyard. So we check the current rule for the address and permit before building, and we do not state a height as fact. What is settled is the gate: it has to close itself and latch itself, every time.

Neighborhoods We Serve

  • Washington Park

    Brick homes from 1900 to 1940 around a 165-acre park. Park-facing fronts stay low and open; the solid 6-foot fence belongs at the rear. Local installers flag the heavy clay here and set posts deeper than the Denver norm. On these streets, a pool fence is the usual call.

  • Cherry Creek

    Cherry Creek North is the residential pocket behind the shopping district: early-1900s Craftsman and bungalow streets with small lots of 5,000 to 10,000 square feet and heavy scrape-and-rebuild. A pool fence is the usual call on these streets.

  • University Hills

    Brick ranches from the 1950s to early 1970s on generous lots, with the High Line Canal running through the middle. Large corner lots are common, and I-25 bounds the east edge. These streets usually call for a pool fence.

  • Harvey Park

    About 4,000 homes built between 1954 and 1957, including 130 to 170 Cliff May prefab ranches — the largest Cliff May tract outside California. Flat, wide lots with detached garages and private courtyards. On these streets, a pool fence is the usual call.

  • Central Park

    Master-planned community on the former Stapleton airport, built mostly 2002 to 2019. The Master Community Association and sub-associations review fence designs before the city permit — two approvals, in that order. A pool fence is the usual call on these streets.

Local Conditions We Plan For

  • Freeze-thaw cycles that heave shallow posts

    Denver's freeze-thaw ground lifts shallow posts within a winter or two. Frost depth is commonly cited at about 36 inches in the metro, and posts set shallower than that are the usual cause of a leaning fence. For a pool fence, that means posts set deep in concrete — shallow footings are the first thing we check.

  • Bentonite clay that holds water against posts

    Expansive bentonite clay swells when wet and shrinks when dry, and it drains slowly, so post bases stay wet. Pressure-treated posts and a rot board at the base keep pickets out of the wettest soil. On a pool fence job, the post bases get pressure-treated stock and a rot board to keep the wood out of the wet soil.

  • Denver permit and sight-triangle rules

    Denver caps fences at 4 feet in front of the primary street-facing facade and 6 feet behind it, and any fence over 4 feet needs a zoning permit. Corner lots have sight-triangle limits near intersections, and fences sit at least 6 inches back from the public sidewalk. A pool fence still follows the same height and setback rules — we check them for your address before quoting.

  • High-altitude UV that weathers wood and vinyl

    At 5,280 feet, Denver sun is stronger than at sea level. Unstained cedar turns silver-gray in a few years, and vinyl shows hail and UV wear first on the cheaper panels. For a pool fence, that means planning for sun and hail from the start — the material choice is the defense.

What a typical pool fence job looks like in Denver

Typical situation

A backyard pool has no fence, and the homeowner has a toddler and a dog. The pool is visible from the house, and the homeowner wants to keep it that way.

How it is handled

An aluminum pool surround goes in with self-closing, self-latching gates and climb-resistant picket spacing. The current Denver pool-barrier rule is checked for the address before the build, and the gates are tested until they close and latch themselves every time.

Upkeep:Test the pool gates every month — a gate that does not close on its own is not a pool fence. Keep furniture and planters away from the fence so nothing becomes a step over it.

Typical situation

An old pool fence has a gate that will not close itself. The hinges are worn, and the post has leaned.

How it is handled

We diagnose the cause: the post has leaned, and the hinges are worn. The post is reset in fresh concrete, new self-closing hinges go on, and the gate is tested until it closes and latches itself from every open position.

Upkeep:Test the gate every month. Oil the hinges once a year, and check the post each spring for lean.

Typical situation

A multifamily property needs a pool surround, and the manager wants it done in one job with the dog run beside it.

How it is handled

An aluminum pool surround goes in with self-closing, self-latching gates, and a chain link dog run goes in beside it. The pool-barrier rule is checked for the address, and the gates are tested before handover — then monthly by the property.

Upkeep:Test the pool gates every month. Walk the dog run once a month for dig-outs at the base.

Pool fence problems we fix for Denver homeowners

Most pool-fence calls start with a problem, not a wish list. Here are the four we hear most often, and how we handle each one.

Problem

A pool gate that will not close itself

A pool gate that does not close itself is not a pool fence — it is a gap in the fence. The cause is almost always a leaning post or worn hinges.

Our Fix

We diagnose the cause first — post, hinges, or frame — reset the post if it has leaned, fit new self-closing hinges, and test the gate until it closes and latches itself from every open position.

Problem

A fence that can be climbed

A pool fence with horizontal rails on the pool side, or with furniture and planters next to it, can be climbed — and a fence that can be climbed is not a pool fence.

Our Fix

We check the picket spacing and the rails, move the climbable furniture away from the fence, and talk through a fix where the fence itself is the problem.

Problem

A leaning pool fence after a freeze-thaw winter

A heaved post shows immediately on a pool fence — the panels rack, and the gate stops closing. A leaning pool fence is a safety problem, not a cosmetic one.

Our Fix

We dig out the failed footing, reset the post deep in fresh concrete, and rehang the panels. If the panel is undamaged, you keep it.

Problem

A pool fence built to the wrong height

A pool fence built to an assumed height — 48 inches when the rule wants more, or the reverse — is a fence that may have to come down. The published height figures conflict, so the rule has to be checked, not assumed.

Our Fix

We check the current Denver pool-barrier rule for the address and permit before building, and we do not state a height as fact. If your existing fence was built to an assumed height, we check the rule for your address before advising.

Black aluminum pool fence around a Denver backyard pool with deck

Why Denver homeowners choose a pool fence from us

A pool fence is a safety fence first and a fence second. Here is what you actually get when we build yours.

  • Gates that close themselves

    Every pool gate gets self-closing hinges and a self-latching latch, tested until the gate closes and latches itself every time, from every open position. A pool gate that does not close itself is not a pool fence.

  • Climb-resistant by design

    Pickets are spaced to resist climbing, and horizontal rails are kept off the pool side where a child could use them as a step.

  • Keeps the pool visible

    Aluminum and iron keep the pool visible from the house. The fence is not a substitute for watching the water, and a fence that hides the pool is worse than no fence at all.

  • What pool fencing costs in the Denver market

    Third-party market guides published in October and November 2026 put aluminum ornamental fencing — the most common pool-fence material — at $29 to $90 per linear foot installed. Sources: NumeralQ, 26 Oct 2026; Denver Fence Contractors; Recommended.app, Nov 2026 access. Those are market ranges, not Payless Fence Company prices. Call (720) 697-2456 with your fence length and material and we will talk through a quote for your yard.

Denver fence rules to know before you build

Denver Fence Rules to Know

  • Pool-barrier height is checked, not assumed — Denver's residential pool-barrier height is not settled in the code text we reviewed — secondary sources conflict between 48 and 60 inches. We check the current rule for your address and permit before building, and we do not state a height as fact.
  • Zoning permit over 4 feet — Denver requires a zoning permit for any fence over 4 feet tall; over-height requests go through the Zoning Code's over-height process. A pool barrier is checked per address — see the first item above.
  • Colorado 811 before digging — We contact Colorado 811 for utility locates before any post hole is dug; never dig blind in a Denver yard — a pool barrier means a full run of holes.
  • HOA first, city second — In HOA neighborhoods, the association approves the fence before the city permit is filed; neither approval substitutes for the other — and a pool barrier can add a third review.

Rated on Google

Google ★★★★★4.9 out of 5

Rated 4.9 out of 5 from 27 Google reviews. Read the reviews on our Google Business Profile, or call (720) 697-2456 to talk about your fence.

Local experience with pool fences in Denver

Pool fences in Denver have to survive freeze-thaw ground, and their gates have to close themselves every time. We build aluminum and iron pool surrounds with climb-resistant spacing and self-closing, self-latching gates — and we check the current barrier rule for the address before building, because the published height figures conflict.

  • Posts set deep for Denver's bentonite clay and freeze-thaw ground
  • Self-closing, self-latching gates tested every time
  • Climb-resistant picket spacing
  • Pool-barrier rule checked for the address before building
  • Old fence, footings, and scrap hauled away
Call (720) 697-2456
Fence crew setting posts along a string line, workers from behind, Denver backyard

Rated 4.9 out of 5 on Google

Payless Fence Company is rated 4.9 out of 5 from 27 Google reviews. We keep the page to the aggregate rating; the individual reviews are on Google. Call (720) 697-2456 to talk about your pool fence.

★★★★★

4.9 out of 5

Based on 27 Google reviews for Payless Fence Company. We do not publish customer quotes on this page; read the reviews on Google, then call us to talk about your fence.

Call (720) 697-2456

Frequently asked questions about pool fence installation in Denver

The questions we hear most often about pool fence, answered for local homeowners and property managers.

How much does pool fence installation cost in Denver?
Third-party market guides published in October and November 2026 put aluminum ornamental fencing — the most common pool-fence material — at $29 to $90 per linear foot installed. Sources: NumeralQ, 26 Oct 2026; Denver Fence Contractors; Recommended.app, Nov 2026 access. Those are market ranges, not Payless Fence Company prices. Call (720) 697-2456 with your fence length and material and we will talk through a quote for your yard.
How tall does a pool fence have to be in Denver?
Denver's residential pool-barrier height is not settled in the code text we reviewed — secondary sources conflict between 48 and 60 inches. The public-pool rule (60 inches, self-closing and self-latching gates, latch at 54 inches or higher) is written for public and semi-public pools, not for a backyard. We check the current rule for your address and permit before building, and we do not state a height as fact.
What does a code-compliant pool fence need?
A fence around the pool with self-closing, self-latching gates and climb-resistant picket spacing, built to the barrier rule that applies to your address. The gate is the critical part: it has to close and latch itself every time, from every open position. Test it monthly — a gate that does not close on its own is not a pool fence.
Do I need a permit for a pool fence in Denver?
A zoning permit is required in Denver for any fence over 4 feet tall, and a permit at any height on a landmark property, in a historic district, or along a designated parkway. Fences 4 feet and under generally need no permit, and a like-for-like replacement of a fence that already had a permit is generally exempt when nothing changes in location, footprint, or height. A pool barrier is checked per address — the height rule is not settled in the code text we reviewed. Check your address before you build — historic-district and parkway rules are block-specific — and call (720) 697-2456 and we can walk through what your lot needs.

Call Payless Fence Company about a pool fence in Denver

Call Payless Fence Company at (720) 697-2456 to talk about a pool fence for your pool. We will go over the surround, the gates, and the barrier rule for your address, and set a time to measure.

Call Now Call (720) 697-2456

Talk to our fence crew

Call (720) 697-2456 to talk about a pool fence. We answer Monday through Sunday, 7:00 AM to 8:00 PM. Have the pool size, the surround, and your neighborhood ready, and we can talk through the next steps on the call.

Payless Fence Company


  • Address

    Payless Fence Company LLC, Denver, CO 80201, US

  • Hours

    Mon–Sun 7:00 AM–8:00 PM

Call (720) 697-2456 Call Now
Call Call